How to Fix a Leaking Moen Bathroom Sink Faucet Fast!?

Have you ever had to deal with leaking bathroom sink faucets? If yes, then you know how annoying such a problem can be. Not only does it leave a bad impression whenever guests come over, but also makes your home look dirty. And trust me, no one wants to live in those kinds of surroundings. Well, if you’re currently dealing with a leaky bathroom sink faucet, don’t worry because I have the perfect solution for you.

Sinks are usually placed somewhere in the kitchen or bathrooms for easy cleaning and maintenance. However, these sinks often get clogged due to constant overflow from water running down their drains. This is where the problem starts, and before you realize it, you’ll be spending hours every week cleaning out the mess caused by a broken drainpipe.

To fix a leaky bathroom sink, you should start by identifying the source of the problem. For example, if you notice that your bathtub drain pipe has started leaking, you should immediately check whether the pipes are blocked at other places. Afterward, you should fix the blockage by putting some caulk around them. In case, however, the problem is simply a faulty valve, you should replace it with a new one.

How to fix a leaking Moen bathroom sink faucet fast?

If you want to avoid having to spend hours every week cleaning up the mess caused by a leaky sink, then here are some simple ways on how to fix a leaking Moen bathroom sink faucet:

1) Use a plunger to unclog the sink

Using a plunger is an effective way to clear all kinds of clogs. To use this tool effectively, you need to first remove any objects that may be blocking the drain. Next, place the plunger into the sink and slowly move it back and forth until you see bubbles coming out of the drain. Once done, you should repeat the process again until the sink is completely clean.

2) Change the washer and the stopper

The washer and the stoppers are two parts of the plug-in faucet that are responsible for keeping water inside the sink. When they become worn out, they will eventually stop working properly. Thus, replacing both of them is necessary.

3) Clean the sink

After fixing the leaky sink, you should always make sure that there is no more dirt left behind. You can do so by using a sponge or a brush to wipe away the excess dirt. Also, ensure that you keep the sink dry after each wash.

4) Check the connections

When looking for leaks, you should always pay attention to the connections. If you find that the connection between the sink and the faucet is loose, you should tighten it. Likewise, if you find that the connection is too tight, you should loosen it.

5) Replace the rubber gasket

Rubber gaskets are used as seals to prevent leakage. They are made of silicone and are installed under the sink. Over time, they tend to wear out and thus cause leaks. Therefore, when replacing the rubber gasket, you should make sure that you buy a new one.

6) Remove the old faucet

Before installing a new faucet, you should first remove the old one. Doing so will help you identify which part needs replacement.

7) Install the new faucet

Once you have identified what needs replacing, you should install the new faucet. Make sure that you follow the instructions carefully to ensure that everything goes well.

8) Test the faucet

Once you have finished installing the new faucet, make sure that it works properly. If not, you should test the faucet again. This step is important because it helps you determine whether you have fixed the leaky sink correctly.

9) Reinstall the faucet

Finally, once you have tested the faucet, you can reattach it to the sink. Ensure that you put in enough screws to hold it firmly.

Why is your Moen bathroom sink faucet leaking?

There are many reasons why your Moen bathroom sink might be leaking. Some of these include:

1) The faucet handle is broken

This is usually caused by a user’s mistake. For instance, if you try to turn off the water while the faucet is still dripping, you could end up breaking the handle. In such cases, you should replace the faucet handle.

2) There is a crack in the pipe

If you notice that there is a small hole on the side of the sink, then you should check if the pipe has cracked.

3) The sink is damaged

If the sink looks like it has been damaged, then you should contact a professional plumber immediately.

4) The faucet is defective

In some instances, the faucet itself could be faulty. It is possible that the faucet is leaking due to a problem with its design.

5) The sink is filled with debris

Debris can block the drain line and thus cause a leak.

6) The faucet has been turned off

The faucet may also leak if you accidentally shut it off. To avoid this from happening, you should always remember to turn them back on before leaving home.


Leaky sinks are quite common. However, most people don’t know how to fix them. Fortunately, we have provided you with all the information you need about how to repair a leaking sink. Follow our tips and you will soon see that your sink won’t leak anymore!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *