Low water pressure in bathroom sink do this!
Have you ever wondered why water pressure in bathroom sinks seems low? Is it because of the way you installed or maintained your sink? If yes, then read on.
Sinks are one of the most important fixtures in bathrooms. They provide us with a place to wash our hands, brush our teeth, shave, etc. In addition to being functional, they also look great.
However, there are some things you should consider before installing a new sink. Read on to discover the top reasons why your sink might be experiencing low water pressure.
4 Reasons For Low Water Pressure
Water pressure has always been a problem for me. I live in a rural area where water pressure is low. Sometimes my shower head doesn’t even turn on. Is there anything I can do about this?
Water pressure is measured in pounds per square inch (psi). The higher the psi, the better the water flow. In general, the average home should get at least 50 psi. If you don’t have enough pressure, you might experience problems such as leaks or clogs.
“Low water pressure” is often caused by a leaky faucet or pipe. This is usually due to corrosion or damage from freezing temperatures. If you notice a slow drip or steady stream of water, then you may want to check out these solutions.
If you’re not sure what’s causing your low water pressure, here are four common causes:
1. Your plumbing system isn’t working properly.
2. You’ve got an old and worn-out water heater.
3. There’s something wrong with your pipes.
4. A broken valve or fixture could be causing the issue.
How To Fix Low Water Pressure In Bathroom Sink
Fixing low water pressure in bathroom sinks is easy if you know how to do it. Here are three ways that will help you fix the problem.
Check Out These Solutions
Fixing low water pressure in bathtubs and showers is similar to fixing low water pressure in bathroom sink. However, it requires more expertise. If you need help, contact a professional plumber.
Solution 1: Check Your Plumbing System
The first thing you should do when trying to solve any plumbing problem is to make sure that all of the parts are working correctly.
To do this, follow these steps:
- Turn off the main supply line.
- Remove the hot and cold water lines from the wall.
- Disconnect the shutoff valves on both sides of the house.
- Run the water until it stops running.
- Once the water runs clear, reconnect the supply line.
- Now, run the water again. If everything works fine, then you can move on to the next step.
Solution 2: Check Your Water Heater
Another cause of low water pressure is an old and worn-down water heater. If you suspect that this is the case, then you’ll need to replace your water heater.
Replacing a water heater is a big job. It involves removing the existing unit and replacing it with a new model.
Before you begin, disconnect the electrical power to the water heater.
Start by checking the thermostat. Make sure that it’s set to “heat.”
Next, remove the cover plate located near the bottom of the tank.
Look inside the tank for cracks or holes. If you find any, then call a plumber immediately.
Next, look for signs of corrosion. Corrosion occurs when metal reacts with oxygen in the air. As a result, the metal becomes brittle and weak.
If you see any signs of corrosion, then you’ll need a replacement water heater.
Solution 3: Replace Leaky Pipes
If you think that your pipes are leaking, then you’ll need them replaced.
You can use a tool called a “pipe tester” to determine whether there are any leaks.
This device consists of a long tube with a rubber bulb attached to one end. When you insert the other end into a hole in your pipe, you’ll hear a hissing sound as air escapes through the hole.
If you hear a hiss, then you have a leak. Once you locate the leak, you’ll need to repair it.
Solution 4: Repair Broken Valves
A broken valve or fixture could also be causing your low water pressure. If this is the case, you’ll need to replace the part.
Fortunately, most fixtures are relatively inexpensive. For example, toilets cost about $20-$40.
However, if you’re not sure what type of fixture you have, you’ll need to hire a professional plumber. They can tell you which part needs to be repaired. If you don’t want to pay someone else to fix the problem, you can try repairing it yourself.
First, turn off the water at the faucet. Then, open the valve slowly so that no water comes out. When the faucet is completely closed, you should hear a click. The click means that the valve has locked itself in place. Next, unscrew the handle. You may need to pry it loose. After that, take a screwdriver and push down on the handle. Slowly pull it up. Finally, tighten the handle back into position.
Solution 5: Fix a Dirty Filter
The last possible reason why you might be experiencing low water pressure is because of a dirty filter.
Filters are important because they help keep debris out of your plumbing system. Unfortunately, filters can become clogged over time. As a result, they won’t work properly. To prevent this from happening, you’ll need to clean your filter regularly. To do this, simply pour some hot water through the filter. Let it run until all of the dirt falls away. Afterward, rinse the filter thoroughly.
Solution 6: Check Your Plumbing Fixtures
Finally, check your plumbing fixtures. These include sinks, tubs, showers, etc. If these parts aren’t working correctly, then you’ll need to fix them.
Fortunately, many fixtures are fairly easy to install. For example, a sink can usually be installed using only three screws. Once you’ve finished installing the fixture, you’ll need to make sure that the drain line is clear.
In order to do this, first, remove the stopper from the sink’s drain. Then, lift the sink slightly so that you can reach under it. Remove any obstructions. When everything looks good, put the stopper back in the drain.
You’ll now have better water pressure in your bathroom sink. Hopefully, we were able to solve your problem.
Hopefully, you now know how to solve low water pressure problems. However, if you still need more information, feel free to ask for further assistance. Good luck!